The kitchen stands among the crucial rooms in our homes. This is where all delicious food preparations are done all through. Maintaining the standards of these rooms is vital in serving us for extended periods. Kitchen cabinets are made from different materials, stainless steel, wood, laminates, and many others.
An idea of how to prevent damage by any agent is excellent all through. Kitchen cabinets made of wood get exposed to several elements that can damage them and their appearance at large if not appropriately maintained. Peeling and weathering are the main results you will have from the unprotected wood. Peeling woods looks unsightly, and restoring them can be a challenge at large. Proper preparations are necessary before finishing with a product capable of withstanding ongoing exposure.
Common Reasons for Peeling
Did not Made Proper Preparations
The main reason for such situations happening is improper preparations before installing the cabinet. Poor preparations will stop the penetration of oil and thereby failing to protect the wood. A few examples of improper preparations include;
- The wood wasn’t cleaned with a wood cleaner before applying a finish. Quality cleaners are best to remove all available dirt on the surface and grime. Avoid household chlorine-based cleaners as they usually damage the cellular structure of wood.
- Applying a new coat over an old failed coating. This prevents the new coat from performing properly as there will be a continuous failure of the old sealer.
- Forgetting to use a wood brightener after a stain stripper. This leaves the wood in high pH state, making the stains to fail faster.
- Use of an oil-based stain over a water-based option. If you need to change from one brand to another, remove the existing coat before replacing it with the other.
This is another cause of this problem as super sanding your wood material into a super smooth surface causes penetration issues at large. The more porous your material is, the higher the chances of the stain attaching to the wood’s interior parts. Additionally, use the right brightener and cleaner to remove sand dust after complete with the sanding process.
Usage of Wrong Sealer or Stain:
Employ stains that are specifically designed for particular woods. Coats that are too thick will be unable to penetrate the interior parts will fail faster. Avoid varnishes or polyurethane coats in woods running horizontally as it will peel and turn yellow, requiring heavy sanding for the problem to be fixed.
Applying More Stain:
Most homeowners believe that applying two or more coats at ago is the best way to do, but this is not right. Over applying the coats films on top of the surface instead of penetrating deeper into your wood. Film foaming coats are prone to wearing and peeling off over time.
Using Poor Quality Stain
Different wood stains are sold in the market, but they are not the same at all. You can go through different online reviews to get an idea of the best one to consider. Avoid all stains with a history of poor performance and failure.
After getting an idea of the causes of the problem, the next thing is knowing how to fix and prevent it from happening in the future. Below is a guide to help you complete the project in the best way possible.
Step by Step Guide to Repair
Scrub off the solid strain
Scrub off the old color strain using a paint scraper. Reset any screw or nail sticking out from the wood as you are busy scrubbing the wood. Follow up by stripping the deck using a special stain remover. All nearby siding should be tape plastid, wet, or cover down grass around and then spread your heavy strain coat remover over the peeled wood. Use a stiff brush and a finish remover to scrub off the old stain from the wood. Wait for up to about 30 minutes for the stain to soften before removing it. Keep the wood wet all through until the finish softens enough to be easily scrubbed off. Use your stiff brush to scrub off the stain, cover at most 225 sq. Ft. at a time as you move on.
Sanding the wood
Before this step, rinse off the residue and allow some time for the wood to dry up. In areas that seem the stain doesn’t come off or heavily discolored points, make use of a coarse stripping disc. This is a rough disc that will make work easier on those surfaces more than the orbital sanders or the belt. The discs are available for either the drills or the angle grinders.
Lastly, use a conditioner/brightener to neutralize your sealer or stain remover and clean the wood to attain its original color or something closest to that. One gallon of brightener will averagely cover an area of 200 sq. Ft. Next is brushing on the conditioner/ brightener diluted in water. Again scrub the wood and thoroughly rinse it to give it its original look.
Allow your wood to dry up before applying a bright, penetrating finish. The usage of clear finishes will show the wood’s original color; however, it needs to be reapplied at least once a year.
Solid stains provide extended protection of the wood, but then, it will be hard when needed to be scrubbed off. There is also a need to reapply the penetrating stain more frequently. Unlike the solid stains, penetrating stains doesn’t need to be stripped off as such.
These are the steps to guide you to repair your pilled stain on a wood stained kitchen cabinet. Have the wood attain its original look or something closer to serve you for extended periods. Use the right repairing tools and pay close attention to the guide to have better results.
Treating your wood before installation is the ideal way of preventing the occurrence of peeling wood stain. Use the right type of oil that penetrates the wood quickly to offer its maximum protection all through. In the market, you will find other coatings that envelope the wood, so it’s upon you to consult on the one that diffuses into your wood faster. Maintain your kitchen cabinet to serve you for an extended period.